I wonder if there's any benefit to doing this rather than just setting up my LAN router's external IP to an exposed host in the Fritzboz. Open this device completely for internet sharing via IPv6 (exposed host) Klicken Sie in der Benutzeroberfläche der FRITZ!Box auf "Internet". Get the MAC address of your PS4 (Connection Settings/Status). Log into your router by typing it’s IP address in any browser (often 192.168.0.1 or 192.168.1.1) and the password. ; If the network device has a static IP address: The FRITZ!Box offers you a completely closed firewall to protect against unwanted data from the internet. FRITZ WLAN_7490 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it … This means that the FRITZ!Box firewall is no longer enabled. Select the Exposed host from the drop-down list Port forwarding enabled for. In the factory settings, all of the computers, smartphones, and other devices connected to the FRITZ!Box are already completely protected against attacks from the internet. A DMZ (demilitarized zone) on a home router refers to a DMZ Host. The first thing that you will need to do is set a Static IP on your PS4. If you use the "exposed host" function, all of the ports are opened for a device in the network. "Exposed Host" List Entry: Note: The "Exposed Host" list entry is available only in the Advanced view. Klicken Sie neben dem (Computer-) Namen des Gerätes, für das der Exposed Host eingerichtet werden soll, auf die Schaltfläche (Bearbeiten). So I will still file a bugreport @ AVN What is a DMZ . Forwarding Ports in a FRITZ BOX WLAN 7490 Router. First of all, power on your PS4 ; Then go to Settings on your PS4 … This is why it is often recommended to set up a static IP address in conjunction with other connectivity troubleshooting steps. Strictly speaking, this is not a true DMZ. Save settings and close. ; Select the network device (e.g., a computer) that you would like to set up the exposed host for: If the network device's IP address is dynamically assigned by the FRITZ!Box's DHCP server, select the name of the network device from the drop-down list to computer. Port forwarding for the "Exposed Host" list entry routes all queries from the Internet to the specified computers through other port forwarding settings unless another rule is specified. Select Exposed host from the drop-down list Port forwarding enabled for. Select the network device (e.g., a computer) that you would like to set up the exposed host for: If the network device's IP address is dynamically assigned by the FRITZ!Box's DHCP server, select the name of the network device from the drop-down list to computer. Klicken Sie auf die Registerkarte "Portfreigaben". If this option is not enabled, the FRITZ!Box will block queries, because the port sharing settings for the network devices are not known in the downstream network. Find DMZ Settings under Security or Advanced or similar. Stell ein, dass sich die PS4 selbst Ihre Ports öffnen kann (von innen nach außen), ein Exposed Host ist nicht notwendig - unnötiges Risiko.. Die bekannten Ports öffnen reicht oft nicht.. Klicken Sie im Menü "Internet" auf "Freigaben". A home router DMZ host is a host on the internal network that has all UDP and TCP ports open and exposed, except those ports otherwise forwarded. --Downstream 474 Kbps (59.3 KB/sec) 511 Kbps (inc. overheads) Upstream 245 Kbps (30.6 KB/sec) 264 Kbps (inc. overheads) Falls für das Gerät noch keine Freigaben eingerichtet sind: Enter or select your PS4’s MAC address and to place it in the DMZ. The FRITZ!Box routes the queries on to the device. The internal IP address of your router is static. Fritzbox 'Exposed Host' setting bug (firmware: v99.04.88) This way I still have control (to some extend) over the rule base in the SRX100. NOTE: There is a firmware update for the FB at this moment (99.04.89), but the release notes don't mention anything in regards to this 'feature'.